Ytbehandlingsprocess för bearbetning av precisionsmaskiner

Jul 14, 2025

Lämna ett meddelande

In the processing of precision machinery parts, the requirements for strength and toughness are relatively high. Its working performance and service life are closely related to its surface performance. The improvement of surface performance cannot be achieved simply by relying on materials, and it is also a very uneconomical approach. However, in actual processing, its performance must meet the standard. At this tid, ytbehandlingsteknik behövs .

 

Inom området för mögelytbehandling är mögelpoleringsteknologi en mycket viktig länk och en viktig process i bearbetningen av arbetsstycken . ytbehandlingsprocessen för precisionsmaskiner som bearbetar är mycket viktigt i bearbetningsprocessen . Det är värt att påminna om att ytpolering av precisionsdelar formar inte bara påverkas av processen och polishing, men också av den miRr) Denna punkt har inte fått tillräckligt med uppmärksamhet i den nuvarande bearbetningen, vilket också visar att polering själv påverkas av materialet .

 

Although the processing technology for improving the surface performance of precision parts is constantly innovating and upgrading, the most widely used in the processing of precision parts is still hardening film deposition, nitriding, and carburizing technology. Because nitriding technology can obtain a very high level of surface performance, and the process of nitriding technology has a very high℃of coordination and consistency with the quenching process of steel in precision Delar .

 

The temperature of nitriding is very low, so no intense cooling process is required after nitriding treatment, so the deformation of precision parts will be very small. Therefore, nitriding technology is one of the earliest technologies used to enhance the surface properties of precision mechanical parts, and it is also the most widely used technology at present.

 

 

Skicka förfrågan